1.) Raise and support the vehicle on flat surface. Vehicle shoud
be OFF.
2.) From underneath the vehicle, locate the transmission on the driver side. Locate
both 17mm allen wrench transmission drain / fill plugs. The fill plug faces horizontal towards the front of
the vehicle; the drain plug faces vertially down toward the ground.
3.) Loosen both plugs, first remove the fill plug. ** DO
NOT drain the transmission untill the fill plug has been pulled first to ensure you can re-fill the transmission. **
Place drain bucket / pan underneath drain plug, and then remove drain plug.
4.) Let transmission fluid drain out; if transmission is cold, allow fluid to completely
drain untill dripping occurs.
5.) Re-install drain plug after draining.
6.) Using a hand-pump or siphon, pour in new transmission fluid into the transmission through
the fill plug hole. * Make sure to fill with Sythetic 75W - 90 GL-4 fluid;
no exceptions. * Fill untill fluid drips out of the filler hole; double check the transmission to make sure
its full by using your finger.
7.) Re-install fill plug once transmission is full.
8.) Check for leaks / tightness of plugs.
9.) Lower vehicle.
